Univex Indoor Furnishings YB9290 User Manual

Fina™ Technical Specification

YB9290

Glass Shelf

Dimensions:

Stock Numbers:

YB9290BN – Glass Shelf

Brushed Nickel Finish

YB9290CH – Glass Shelf

Chrome Finish

Materials:

Installation Instructions:

Glass Shelf posts are constructed of

zinc. Shelf is tempered glass.

1. Position the mounting template on the wall in the desired location.

Using a level, align the template and tape it to the wall.

2. Remove each mounting post from the body by loosening the setscrew.

3. Place each mounting post on the template with notch facing down.

4. Mark the 2 large hole locations of each mounting bracket.

5. Attach each mounting bracket to the wall, using the wall anchors

provided

6. Mount each base on the corresponding mounting bracket. Check and

make sure that the base set screw hole(s) are facing down. Assemble

a set screw to each base. Use the allen wrench included in hardware

kit to tighten each set screw and secure the assembly to the mounting

bracket(s).

7. Tighten all 4 screws. Do not over tighten.

8. Assemble glass to each post with glass shelf between both washers

and finished cap.

9. Place each post over the mounting plate with setscrew down. Tighten

both setscrews.

Cleaning Instructions:

To preserve the fine finish of this product, clean only with a soft

damp cloth. Dry well. Do not use commercial or abrasive cleaners.

Stock Number:______________________Glass Shelf

By Creative Specialties

25300 AL MOEN DRIVE · NORTH OLMSTED, OH 44070

CORPORATE HEADQUARTERS: (800) 321- 8809 · FAX: (800) 848- 6636

INTERNATIONAL: (440) 962- 2000 · FAX: (440) 962-2726

CUSTOMER SERVICE (USA): 800-882-0116 · FAX: (888) 379-272 0

WWW.CSI.MOEN.COM

ã Copyright Creative Specialties International

Literature #BA1456